Tire Size Calculator & Fitment

Support

Questions, a bug, or a number that looks wrong? Email titef.beckham@gmail.com.

If a result looks off, include the tire sizes you entered so it can be checked.

How is tire diameter calculated?

For metric sizes like 275/65R18, the middle number is the sidewall height as a percentage of the width.

sidewall
= width × aspect ÷ 100= 275 × 65 ÷ 100 = 178.75 mm
diameter
= rim × 25.4 + 2 × sidewall= 18 × 25.4 + 2 × 178.75 = 814.7 mm ≈ 32.07 in

Flotation sizes like 35x12.50R20 already state the diameter (35 in) and the width (12.5 in), so only the sidewall needs working out.

sidewall
= (35 − 20) ÷ 2 = 7.5 in

Which way is my speedometer off?

easy to get backwards

With bigger tires, you’re going faster than the speedometer shows. Going from 275/65R18 (32.07 in) to 35-inch tires, when it reads 60 mph you’re really doing about 65.5 mph. Smaller tires do the opposite.

actual
= indicated × new diameter ÷ old diameter= 60 × 35 ÷ 32.07 ≈ 65.5 mph

What’s the ±3% rule?

A common guideline: keep the new overall diameter within about 3% of the original so the speedometer, ABS, traction control and transmission shift points stay close to factory. It’s a guideline, not a guarantee. Going from 32.07 in to 35 in is a 9.1% jump, well past it.

What do offset and backspacing mean?

Offset (ET) is the distance in millimeters from the wheel’s centerline to its mounting face. Lower or negative offset pushes the wheel out, for more poke. Backspacing is the distance from the mounting face to the wheel’s inner edge.

backspacing
≈ (wheel width in inches + 1) ÷ 2 + offset ÷ 25.4

For a 9-inch-wide wheel with −12 mm offset, that’s (9 + 1) ÷ 2 − 12 ÷ 25.4 ≈ 4.53 in.

How do bigger tires affect gearing?

Bigger tires lower your effective gear ratio, so the engine turns slower for the same road speed and the truck can feel sluggish. To restore it, choose the axle ratio closest to the target ratio below.

effective
= axle ratio × old diameter ÷ new diameter
target
= axle ratio × new diameter ÷ old diameter

With 3.73 gears, going from 32.07-inch to 35-inch tires leaves you with an effective 3.42. The target is 3.73 × 35 ÷ 32.07 ≈ 4.07, so 4.10 is the closest common ratio.

Results are estimates. Confirm fitment and clearance with a tire shop before you buy.